Hello and welcome, This post will provide you with information regarding the ARMORED CORE™ VI FIRES OF RUBICON™ – How to hold the joystick in both hands, and we hope you will find this material helpful.
This post will show you how to configure a (two-handed) dual joystick for an improved human.
This is the setup method for the reinforced person who wants to
Hold the joystick with both hands
.
This is more of a guide than a note.
It is Supports non-compatible controllers the same as .
It would be best to have a foot pedal as well.
Please install and use this software at your own risk.
Please leave any comments or suggestions in the comments section.
The basic principles are the same.
Translation with
www.DeepL.com/Translator – [DeepL.com]
(free version)
You can also find out more about
x360ce 64-bit
official website – [x360ce.com]
.
.
I recommend that you use the updated version 4, which is the latest version.
Ver3.x is fine if you’re worried about the CPU load.
It appears that ver3.x cannot be recognized. Information requested.
What to do if the game controller doesn’t respond?
There is a bug that prevents the controller from being recognized when it is in the background, during task switching, or startup.
Countermeasures
Enable steam input
How to use ver4
Download ver4.x and unzip the file.
Rename your file if you wish to manage it separately per game.
|
Add the controller you want to configure by clicking the [Add…] button. Add the select the controller controller you wish to configure by pressing the button.
Do this for each controller you wish to use.
|
3. Perform key binding (mapping)
Click on the controller that you want to bind in the list of controllers added at the top
Set it at the bottom.
Do this for every controller.
Note: The column that controls the column is
selected in blue
, without or with a checkbox.
If the output is a controller and it is disruptive, remove the checkbox to be described at 4. Note that mapping will be unavailable for a short time (a few seconds) after the change.
|
Set the controller’s anti dead zone
All games, including steam games, have a dead zone preventing fine input. The effect is most noticeable when using joysticks because the amount of movement is so large.
Change Anti-Dead Zone (ADZ) and Dead Zone (DZ) values in the Left(Right Thumb tab
At the bottom.
Check the output of the stick as described below.
The steam check is a guide only, so adjust it when checking the game.
The dead zone on the
The game side of has been confirmed to be larger
Increasing Anti dead zone by 12,000 (35%) may be better.
The horizontal stick axis should be smaller. The other axes should be larger. This is for ease of use.
Recommendation
Anti-Dead Zone : 6-35% 2000 (minimum value of steam side)12000
Dead Zone: 1% 328
|
5.
By:
Checking the Enable checkbox
The virtual controller is enabled in the upper-left corner and is output according to the key bindings.
The game will recognize it at this point. Minimize it or put it on the table and play.
That’s all!
Don’t Forget to Save
The key bindings are located in the upper-right corner!
For ARMORED CORE™ VI FIRES OF RUBICON™ – How to hold the joystick in both hands, see this guide. Please let us know in the comments below if you find anything incorrect or outdated, and we will attend to it as quickly as possible. I hope that today turns out well for you. To give credit where credit is due, I’d like to mention that an article written by OTAS04s inspired this guide. Don’t forget to add us to your bookmarks if you enjoyed the post; we update regularly with fresh stuff.
- All ARMORED CORE™ VI FIRES OF RUBICON™ Posts List
Leave a Reply