Introduction
Certain trucks have a variety of tire types available under each category; In the image below you can see the KRS 58 “Bandit” has 3 tires available under “Highway”, “Allterrain”, and “Off-road”.
Take the Allterrain tires as an example, “UAD I”, “UAD II”, and “UAD III” all have the same in-game wheel performance of “Good”, “Good”, and “Average” for on-road, off-road, and mud.
Now, how do you know if there’s actually any difference in these tires other than a cosmetic one? You don’t, at least not as far as the game is concerned with telling you, and so this guide will give you the answers to your question: Is there any difference at all? Yes, yes there is!
Highway
Asphalt | Dirt | Mud | |
HS I | 2 | 0.8 | 0.4 |
HS II | 2 | 1 | 0.2 |
HS III | 2.5 | 0.8 | 0.2 |
UHD I | 3 | 1 | 0.4 |
UHD II | 3 | 1.2 | 0.2 |
UHD III | 3.2 | 1 | 0.2 |
HMD I | 3 | 1 | 0.4 |
HMD II | 3 | 1.2 | 0.2 |
HMDIII | 3.2 | 1 | 0.2 |
FHMD I | 3 | 1 | 0.4 |
Allterrain
Asphalt | Dirt | Mud | |
AS I | 1 | 1.4 | 1 |
AS II | 1 | 1 | 1.2 |
AS III | 1.2 | 1 | 1 |
UAD I | 1.9 | 1.5 | 1 |
UAD II | 1.5 | 1.5 | 1.2 |
UAD III | 1.5 | 1.7 | 1 |
ATHS I | 1.5 | 1.5 | 1.2 |
ATMD I | 1.9 | 1.5 | 1 |
ATMD II | 1.5 | 1.5 | 1.2 |
ATMD III | 1.5 | 1.7 | 1 |
P12 AT | 1.9 | 1.5 | 1 |
TrAT I | 1.5 | 1.5 | 1 |
Offroad
Asphalt | Dirt | Mud | |
OS I | 1 | 2 | 1.2 |
UOD I | 1 | 3 | 1.5 |
UOD II | 0.8 | 3 | 1.9 |
UOD III | 0.8 | 3.2 | 1.5 |
OHD I | 0.8 | 3 | 1.9 |
OHD II | 0.8 | 3.2 | 1.5 |
OHD III | 1 | 3 | 1.5 |
OHS I | 1 | 3 | 1.5 |
OHS II | 0.8 | 3 | 1.8 |
TrO I | 0.8 | 3 | 1.5 |
OHD I (Pacific P16) | 0.8 | 3 | 3.5 |
Hummer H2 Tires | 3 | 3 | 1.5 |
ANKO 1 | 0.8 | 3 | 1.7 |
Mudtires
Asphalt | Dirt | Mud | |
MS I | 0.5 | 3 | 1.6 |
MHS I | 0.5 | 2 | 2 |
MHS II | 0.5 | 2 | 2.4 |
MHS III | 0.5 | 2.4 | 2 |
MSH I | 0.5 | 2 | 2 |
MSH II | 0.5 | 1.7 | 3.2 |
MSH III | 0.5 | 2 | 3 |
MSH IV | 0.7 | 1.7 | 3 |
TMHS I | 0.5 | 2 | 2.4 |
TM I | 0.5 | 2.4 | 2 |
TM II | 0.5 | 2 | 2.4 |
TrM I | 0.5 | 2 | 2 |
TO I | 0.5 | 3 | 8 |
ZHM Tires (ZiKZ 605R) |
Chained
Asphalt | Dirt | Mud | |
CS I | 0.9 | 2 | 1.1 |
UAD III All Chains | 1.2 | 3 | 1.3 |
UAD III Rear Chains | 1.2 | 3 | 1.3 |
MHS I All Chains | 1.2 | 3 | 1.3 |
OHD II All Chains | 1.2 | 3 | 1.3 |
TrC I | 1.2 | 3 | 1.3 |
Chained tires also have an additional value of “IsIgnoreIce” in the files, meaning that they do not slip when driving on ice like regular tires do.
Extra Information
The information in the guide was obtained from files that can be found within the game’s directories, using the in-game tire names for reference.
The file containing the base friction values for the different tire types is found in:
C:\Program Files (x86)\Steam\steamapps\common\Codename – SR/preload/paks/client/initial.pak/[media]\_templates\trucks.xml
Further vehicle specific information is found in:
C:\Program Files (x86)\Steam\steamapps\common\Codename – SR/preload/paks/client/initial.pak/[media]\classes\wheels\*.xml
If you wish to explore these values yourself, you will have to open the “initial.pak” file using an archiver utility such as WinRAR or 7zip, there you will have access to the “[media]” directory allowing you to explore the above files – and any others if you wish.
I hope you enjoy the Guide we share about SnowRunner – Tire Differences; if you think we forget to add or we should add more information, please let us know via commenting below! See you soon!
- All SnowRunner Posts List
Very Helpful I’ve started using this on a daily basis every time I play showrunner I check this when upgrading tires. Thank You Much!