Coupling
I hereby introduce the new Stormworks rail standards, These standards are already compatible with 9/10 workshop vehicles,
These standards will include a good, safe way of coupling.
Coupling
The best way of coupling will be a electrical connector, They can transfer composite signals and electricity trough the cars.
The electrical connector should be on a free Pivot, allowing the connector to move, making sure that turns will go smoothly,
You will also need piston suspension, They should allign with the connector, All of this should be 4 blocks from the ground. (See pictures)
Orgins
This Guide orginated from the stormworks forum, and is using system wich can be used by anyone,
Most trains have electrical connectors, This system is safe beceause the suspension can stop most vehicles from heavily damaging, and the connector can move freely when connected, to make sure turns are done safely.
I made this guide because there is a lack of proper stormworks train standards.
Thank you for reading.
Hope you enjoy the Guide about Stormworks: Build and Rescue – [SRVS] Stormwork Rail Vehicle Standards, if you think we should add extra information or forget something, please let us know via comment below, and we will do our best to fix or update as soon as possible!
- All Stormworks: Build and Rescue Posts List
Leave a Reply