How to Remove ASUS ROG Monitor Stand: A Step-by-Step Guide

Auto Draft 1 - steamlists.com
Auto Draft 1 - steamlists.com

How to Remove ASUS ROG Monitor Stand: A Step-by-Step Guide

Hey friends! If you’re looking to change up your ASUS gaming monitor setup, you might be wondering how to take off that bulky stand. Well, I recently went through the process of removing the stand from my ASUS ROG monitor, so let me walk you through it step-by-step.

Getting Familiar with Your Monitor Stand

Before we get started, let’s quickly go over the main parts of your average ASUS monitor stand so you know exactly what we’re working with. It typically includes:

  • Base: The wide bottom platform that keeps your monitor stable.
  • Neck: The vertical beam that connects the base to the monitor.
  • Connector: The detachable bracket where the monitor attaches.

Pretty straightforward, right? Now, let’s get to business!

Step 1: Remove the Base

Start by carefully laying your monitor face-down on a soft, clean surface to avoid scratches. Depending on your model, the base might be circular, rectangular, or another funky shape.

Look underneath for a screw, latch, or lever. For me, there was a thumbscrew holding on the base plate. I used a Phillips screwdriver to loosen it up and slide the base right off the vertical neckpiece. So satisfying!

Step 2: Detach the Neck

Next up, we need to separate the vertical neck section from the monitor itself. On my ROG monitor, the neck is attached directly to the back of the screen with 4 small screws.

I carefully used my trusty screwdriver to remove them, being extra gentle not to s*rip the heads. Then I grasped the neck piece with both hands and slowly wiggled it free from the monitor. Just like that, I could set aside the stand altogether.

Step 3: Take Out the Connector

Now here comes the slightly tricky part – removing the connector bracket where the stand attaches. After placing my monitor face-down again, I noticed 6 teeny screws around the edges of the back panel.

I slowly removed each one and lifted off the panel to reveal the connector piece mounted to the inside. 4 more screws held that puppy in place. Once I got those out, I could finally detach the connector and fully separate it from my monitor.

Some Handy Tips

From my experience taking apart my ASUS gaming monitor, here are a few useful pointers:

  • Make sure your monitor is unplugged before disassembling it!
  • Use a soft, clean surface like a towel to avoid scratches.
  • An anti-static bracelet helps prevent zapping sensitive components.
  • Keep all hardware together, so reassembly is a breeze.
  • Take pics with your phone along the way to remember how things fit.

Have patience, follow the steps, and remove your ASUS monitor stand. It doesn’t have to be scary. Just don’t force anything – if you meet resistance, recheck for additional screws. And if in doubt, ask an expert for a hand!

Going Pro: Advanced Detachment Tips

If you have a more high-tech ROG gaming monitor, the stand removal process might get a bit more intense. Let’s review some additional things to consider:

Finding Hidden Release Mechanisms

Some advanced ASUS stands have sneaky locking buttons or levers built into the design. Check all sides and underneath for any clues on how to detach it. The user manual should point them out too.

Prepping For Aftermarket Mounts

Are you replacing the stock stand with a cool articulating arm or wall mount? You might need to tweak the flush VESA plate first. Ensure any adapter brackets are properly configured before attaching your new accessory.

Once your ASUS monitor stand is off and you’ve installed replacement mounts, the moment of truth arrives. Plug in those power cords and video cables and fire it up! Carefully check that your monitor turns on and displays properly before reassembling everything.


Be the first to comment

Leave a Reply

Your email address will not be published.


*