Farming Simulator 22 – How to Adjust the Production Values

Farming Simulator 22 – How to Adjust the Production Values 1 - steamlists.com
Farming Simulator 22 – How to Adjust the Production Values 1 - steamlists.com

The Problem

 
 
Just using the sawmill and carpentry shops as an example, but this can be done with any of the productions.
 
 
If, like me, you selected 28 day months, cuz realism, then fed your sawmill oodles and oodles of massive logs only to learn 60 “l” (liters?! wood is measured in liters?) translates into 80 l of boards per cycle, you learned a cycle is a day, and your sawmill won’t produce a pallet until it has 1000 liters! That’s 12.5 game days before you get a single measly pallet. This isn’t enough to pay the mortgage.
 
 
(Side note: In real life wood is measured in board feet and an 10 foot log of 13 inch diameter produces roughly 70 board feet of planks. A 2x4x10/12 is 6.667 board feet. So 70 board feet will yield 10 planks of 10 foot length, but the plank pallets in the game are def not 10 foot, mebbe 4-5, so guaranteed production output should theoretically be at least double and most likely triple.)
 
 

The Solution (or Workaround)

Sawmill Example

 
 
To tweak production values I did the following:
 
 
1. Locate x:\Steam\steamapps\common\Farming Simulator 22\data\placeables\MapUS\sawmill\sawmill.xml
 
2. Make a copy to sawmill.xml.bak or similar.
 
3. Open sawmill.xml in an editor, preferably notepadd++.
 
4. Find the following section:
 
 
<production id=”boards” name=”%s (%s)” params=”$l10n_fillType_wood|$l10n_fillType_boards” cyclesPerHour=”1″ costsPerActiveHour=”2″>
 
<inputs>
 
<input fillType=”WOOD” amount=”60″ />
 
</inputs>
 
<outputs>
 
<output fillType=”BOARDS” amount=”80″ />
 
<output fillType=”WOODCHIPS” amount=”3″ />
 
</outputs>
 
</production>
 
 
You can play with the values, but I changed the cyclesPerHour and Boards amount to:
 
 
<production id=”boards” name=”%s (%s)” params=”$l10n_fillType_wood|$l10n_fillType_boards” cyclesPerHour=”2″costsPerActiveHour=”2″>
 
<inputs>
 
<input fillType=”WOOD” amount=”60″ />
 
</inputs>
 
<outputs>
 
<output fillType=“BOARDS” amount=”180″ />
 
<output fillType=”WOODCHIPS” amount=”3″ />
 
</outputs>
 
</production>
 
 
Save, then start your game, your sawmill production has now increased.
 
 

Carpentry Shop Example

 
 
For my carpentry shop I did something similar but note the different file location:
 
 
1. Locate x:\Steam\steamapps\common\Farming Simulator 22\data\placeables\lizard\productionPoints\carpenterUS\carpenterUS.xml
 
2. Make a backup.
 
3. Find the following section:
 
 
<production id=”furnitureWood” name=”%s (%s)” params=”$l10n_fillType_furniture|$l10n_fillType_wood” cyclesPerHour=”1″ costsPerActiveHour=”3″>
 
<inputs>
 
<input fillType=”WOOD” amount=”36″ />
 
</inputs>
 
<outputs>
 
<output fillType=”FURNITURE” amount=”45″ />
 
<output fillType=”WOODCHIPS” amount=”1.2″ />
 
</outputs>
 
</production>
 
 
And again, fiddle with cyclesPerHour and “FURNITURE” amount. In my case I adjusted like so:
 
 
<production id=”furnitureWood” name=”%s (%s)” params=”$l10n_fillType_furniture|$l10n_fillType_wood” cyclesPerHour=”2″ costsPerActiveHour=”3″>
 
<inputs>
 
<input fillType=”WOOD” amount=”36″ />
 
</inputs>
 
<outputs>
 
<output fillType=“FURNITURE” amount=”145″ />
 
<output fillType=”WOODCHIPS” amount=”1.2″ />
 
</outputs>
 
</production>
 
 
Save, then start your game and now your furniture shop is slightly more productive.
 
 
Obviously you’ll need to do this for the map you want, and you’ll need to explore for the production placeable you want. Have a look in these folders and it’ll become clear.
 
 
Unsure if the game will eventually detect and/or overwrite these changes but so far so good. Also, obviously this is subject to change if the devs reorganize the files in later updates.
 
 
Happy imagining.
 
 

Written by escetic

 
 
This is all about Farming Simulator 22 – How to Adjust the Production Values; I hope you enjoy reading the Guide! If you feel like we should add more information or we forget/mistake, please let us know via commenting below, and thanks! See you soon!
 
 


Be the first to comment

Leave a Reply

Your email address will not be published.


*